This is a 3D Printed parts kit of Myrtenaster and is made to order.Color may vary depending on what plastic I have on hand as it is assumed you will be painting the assembled product (normally black or dark gray).Instructions are included with the kit as well.
Printed with ABS plastic.
Size: ~40 inches long.
A 14.5″ + 9″ long 1/4″ aluminum rods and a 15″ long 1/8″ rod will be included.
Bearings are included and pre-installed to allow for the barrel to spin.Plastic spacers are also installed into the bearings to ensure the barrel will not be restricted when spinning.
Parts can be glued together with super glue or epoxy.Bondo glaze and spot putty recommended to fill joints.
This product can take ~1-2 week to prepare (3D print), depending on how many other orders I am currently processing.
I run the parts through an acetone vapor bath to melt the print lines and make the parts smooth.This vastly cuts down on the amount of sanding needed by 75% or more.This does NOT mean that no sanding is required.I do recommend a light sanding with a high grit sand paper (220+) before priming to give the paint a better grip.
Note: The first picture in the listing is an example of what the finished product can look like.
Reviews
There are no reviews yet.